wholesale green hedge trimmer has been widely used in agricultural production as a common agricultural machinery in today's increasingly mechanized agriculture. As an indispensable accessory in wholesale green hedge trimmer, proper installation is the basic prerequisite for use. In order to make everyone better understand the installation of wholesale green hedge trimmer blades, Xiaobian combined with years of experience, summed up the following points of installation notice!

1. Preparation before installation

1, clean the surface of the plow: before installation, it is necessary to clean the total debris in the surface of the plow and the blade installation groove, such as soil, stones, twigs and other things, so that the surface of the plow is clean and the blade can be firmly attached.

2, check whether the blade is in good condition: Before installation, it is necessary to carefully check whether the wholesale green hedge trimmer blade is corroded, worn or cracked. If these problems are found, they need to be replaced.

3, confirm that the blade and the plow match: before installation, it is necessary to confirm that the selected blade matches the groove of the plow, so as to avoid asynchronization during installation.

2. Install the blade

1, the correct installation direction: the main role of the blade is to plow the soil, in the installation need to adjust the twist Angle of the blade correctly and align with the bend, so that the blade naturally contact the ground.

2, adjust the spacing and depth: the spacing and depth of the blade also need to be adjusted correctly. Generally speaking, the spacing of the blades should be slightly smaller than the first plow teeth of the plow head, generally 60-80mm; The depth needs to be adjusted according to factors such as how dry and wet the land is and what crops are grown.

3, the high and low order should be arranged evenly: because most plowshares will have a high and low difference, the blade needs to pay attention to the order when installing, so that the high and low order is evenly arranged, so as not to affect the farming effect of crops.

Maintenance and maintenance

1, regular replacement of blades: In the process of use, wholesale green hedge trimmer blades will cause problems due to wear or rust and other factors, so regular replacement of blades is very necessary. It is recommended to replace it every season.

2, regular cleaning of plowshares: After chemical fertilizers, herbs and other items are used, it is necessary to clean and dry the plowshares in time.

3, stored in a dry and ventilated place: When the wholesale green hedge trimmer is not used for a long time, the wholesale green hedge trimmer blade is placed in a dry and ventilated place to avoid rust and other problems.

The correct installation of wholesale green hedge trimmer blade is beneficial to the farming effect of wholesale green hedge trimmer. Of course, apart from the correct installation, maintenance and maintenance are also required during normal use. In this way, the blade can have excellent performance in use and provide help for agricultural production.

wholesale green hedge trimmer https://www.keylead.cn/Electrical-Hedge-Trimmer-Straight-Blade