In March, the south experiences the "return of the south wind", followed by the "plum rain season". How to properly store and use the 27-inch smart screen manufacturer is particularly important. Xiao Yi has compiled this article through consultation, hoping it will be helpful to our customers and friends

I. Regarding the 27-inch smart screen manufacturer during the usage process

1. Inspect the circuits and switches, keep the switches dry to prevent leakage and electric shock accidents.

2. Moderate ventilation can help the water vapor adhering to the display screen evaporate quickly and reduce the relative humidity of the indoor environment. However, avoid ventilating on windless and humid days, as this will increase the indoor humidity.

3. Air conditioners can be used for dehumidification, and desiccants and physical moisture absorption methods can be placed to keep the screen dry and prevent it from getting damp.

4. For the rental type of indoor 27-inch smart screen manufacturer, when used outdoors, power must be cut off immediately in case of rain. If the screen cannot be removed in time, quickly cover it with the pre-prepared rainproof cloth. Take the box out to dry on a sunny day. If there is continuous rainy weather, the back cover of the box should be opened and the fan should be set to cold air to dry it. Then place it in a well-ventilated and dry room for more than 8 hours. Lower the brightness to ensure it is illuminated for more than 4 hours to fully dissipate the moisture in the electronic components.

5. During the rainy season, the LED screen should be used at least once a week and turned on at least once a month for more than 2 hours.

6. The outdoor display screen is used in a complex environment, and it is inevitable that there will be water seepage in the box. In addition to the above measures, it is necessary to regularly check whether the waterproof rubber ring of the box body is aged, deformed or damaged on a regular basis. Whether the screws or locks of the sealed box body are prone to loosening and the pressure is insufficient.

7. screen bodies that have been idle for a long time should be frequently powered on for maintenance and debugging. Whether it is an indoor 27-inch smart screen manufacturer or an outdoor 27-inch smart screen manufacturer, if they are not used for a long time, When reactivated, there is a high probability of dead lights and blind dots. By mastering the correct maintenance knowledge, such problems can be completely avoided.

Ii. Correct Remedy for Damp 27-inch smart screen manufacturer Screen Body:

1. Use a fan or other tools at the fastest speed to completely dry the damp 27-inch smart screen manufacturer screen body.

2. After the screen is completely dried, power it on for aging. The specific steps are as follows:

A. Adjust the brightness (all white) to 10% and power on for aging for 8 to 12 hours.

B. Adjust the brightness (all white) to 30% and power on for aging for 12 hours.

C. Adjust the brightness (all white) to 60% and power on for aging for 12 to 24 hours.

D. Adjust the brightness (all white) to 80% and power on for aging for 12 to 24 hours.

E. Set the brightness (all white) to 100% and power on for aging for 8 to 12 hours.

Iii. 27 inch smart screen manufacturer in storage

1. Keep the aviation cases and packaging boxes dry, place desiccants and dehumidifying media. If water vapor enters the packaging materials, dry them in time and do not let them come into contact with water.

2. The warehouse for storing the screen body must be dry, on a high ground, and it is best to place an industrial dehumidifier there.

3. After the damp weather, light up the 27-inch smart screen manufacturer for inspection and seek technical support from the manufacturer if necessary.

27 inch smart screen manufacturer https://apiotv.com/product_class/Portable_Smart_tv.html