The high-quality hastelloy magnetic coupling utilizes the principle of electronic servo control to create damping. Meanwhile, it is equipped with built-in real-time tension indication. Apart from the mechanical friction caused by rolling bearings, no mechanical friction is found in the key part of the entire set of equipment, thereby enhancing the reliability of the entire set of equipment. Durability and compliance during high-speed operation have both been greatly enhanced. The key components for tension control are all installed inside the tensioner structure, making the tensioner itself lightweight. It only requires a DC24V switching power supply from the outside to adjust and obtain the required tension. At the same time, it is equipped with a leak-proof wire organization, as well as a tension attenuation coefficient control loop and a disconnection monitoring system.

When applying the tensioner of the winding machine, especially during assembly, the knob should not be used with excessive force, as it may affect the firmness of the embedded parts. Avoid falling, as it may damage the ceramic parts and the casing. When assembling the tension rods, the clamping screws should point out the plane view of the shaft. When the thread diameter does not match the model specification, it should not be used in a weak way. All vegetable oils are prohibited from being used in the damping wheel. There is no need to start self-care privately.

Replace the wool ring frequently to prevent the thread from being blocked. If the creasing wheel makes abnormal noises or does not rotate, please replace it immediately as the rolling bearing has been damaged. If the damping wheel shows signs of flipping and deviation, please use a cotton rope soaked in ethanol to pull and wipe the O-ring inside the damping wheel. This can remove the residual fruit wax stains of the silk-covered wire inside. Persistently cleaning the production site, the long-term accumulation of dust is very likely to damage the tensioner components. The tension knob at the bottom can only be rotated up and down and cannot be pulled down.

high-quality hastelloy magnetic coupling https://www.abm-magnetics.com/Hastelloy-Isolation-Sleeve-Magnetic-Coupling.html